RO HUN BG
 
 
  ARCO Standard
  (range of Standard products)

 ARTEC 5 (APP) -5oCModified polymer-bitumen membranes, composed of distilled bitumen and plastomers (APP), reinforced with a woven non woven polyester fabric, with longitudinal or grid reinforcing threads or fiberglass mat. Uses: terraces, basements, flat concrete decks in a multilayer system.
 NOVATEC (APP) -5oCModified polymer-bitumen membranes, composed of distilled bitumen and plastomers (APP), reinforced with a woven non woven polyester fabric, with longitudinal reinforcing threads or fiberglass mat. Uses: foundations, terraces, basements, concrete decks (flat, curved) in a single or multilayer system.
 NOVATEC PLUS (APP) -5oCModified polymer-bitumen membranes, composed of distilled bitumen and elasto-plastomers (APP), reinforced with a woven non woven polyester fabric, with longitudinal reinforcing threads or fiberglass mat. Uses: foundations, terraces, basements, concrete decks (flat, curved) in a single or multilayer system.
 ARMATEC (APP) -10oCModified polymer-bitumen membranes, composed of distilled bitumen and elasto-plastomers (APP), having a special reinforcement made of woven non woven polyester fabric, with longitudinal reinforcing threads. Uses: medium complexity waterproofing works, where the mechanical resistance and flexibility are required.
 ARMATEC PLUS (APP) -10oCModified polymer-bitumen membranes, composed of distilled bitumen and elasto-plastomers (APP), having a special reinforcement made of woven non woven polyester fabric, with longitudinal reinforcing threads, with great mechanical properties. Uses: high complexity waterproofing works, where the mechanical resistance and flexibility are required.
 ELASTECH 1000 (SBS) -15oCModified polymer-bitumen membranes, composed of distilled bitumen and elastomers (SBS), reinforced with a woven non woven polyester fabric with longitudinal reinforcing threads or with a fiberglass mat. Uses: foundations, terraces, basements, concrete or metal decks (flat, curved) in a single or multilayer system.
 ELASTECH 1000 PLUS (SBS) -15oCModified polymer-bitumen membranes, composed of distilled bitumen and SBS elastomers, having a special reinforcement made of woven non woven polyester fabric with longitudinal reinforcing threads. Uses: medium- or high complexity waterproofing, flat or curved metal roofs, tunnels, foundations where stress endurance and flexibility are required.
  ELASTECH 3000 (SBS) -20oCModified polymer-bitumen membranes, composed of distilled bitumen and SBS elastomers, having a light reinforcement made of woven non woven polyester fabric with longitudinal reinforcing threads. Uses: medium complexity waterproofing, flat or curved metal roofs, tunnels, foundations.
  ELASTECH 3000 PLUS (SBS) -20oCModified polymer-bitumen membranes, composed of distilled bitumen and SBS elastomers, having a special reinforcement made of woven non woven polyester fabric with longitudinal reinforcing threads. Uses: medium- or high complexity waterproofing, flat or curved metal roofs, tunnels, foundations where stress endurance and flexibility are required.
  ELASTECH 5000 (SBS) -25oCModified polymer-bitumen membranes, composed of distilled bitumen and SBS elastomers, having a light polyester reinforcement with longitudinal reinforcing threads. Uses: high complexity waterproofing, where good flexibility and adherence are required.
  ELASTECH 5000 PLUS (SBS) -25oCModified polymer-bitumen membranes, composed of distilled bitumen and SBS elastomers, having a special reinforcement made of SPUNBOND woven non woven polyester fabric with longitudinal reinforcing threads. Uses: high complexity waterproofing, where mechanical resistance and flexibility are required.
 ROOFTEC POLUnder tiling waterproofing membranes, designed especially for pitched roofs. The waterproofing compound is made from distilled bitumen and APP plastomers, impregnated over a flexible polyester carrier with good mechanical characteristics. The upper side of the underlayment is covered with a light polypropylene mat or with polyethylene film.

  ARCO Professional
  (range of Professional products)
 ARCO THERMO AD (V,P)Special prefabricated modified polymer-bitumen membrane, composed of distilled bitumen and thermo adhesive polymers, activated by heat transfer. Bonding to the substrate (EPS, wood) happens by torching the upper surface of the membrane, without damaging the substrate.
 ARCO THERMO AD ALUSpecial prefabricated modified polymer-bitumen membrane combining a cleaner, safer and faster installation of themo-adhesive products with a complete vapor barrier protection given by the aluminum core.
 ARCO AUTOADHESIVESpecial prefabricated modified polymer-bitumen membrane, composed of distilled bitumen, APP and special polymers which confer self-adhesive characteristics to the membrane. Due to this particularity, the membrane is used in situations where the use of open flame is restricted.
 ARCO FORATOPerforated bituminous waterproofing membrane, with glass fibre reinforcement. Provided with distributed holes, it is used as diffusion layer.
 ARCO ANTIROOTSpecial prefabricated modified polymer-bitumen membrane, composed of distilled bitumen, APP or SBS polymers and special chemical additives against root penetration. Uses: tunnels, foundations, roof gardens, pipe insulation.
 ARCO ALUTOP PLASTOBituminous prefabricated membrane, protected with a foil of embossed aluminum, with a special form of the embossment which permits the free dilation of the metal. The use of the aluminum foil as upper side finish assures, besides perfect watertight sealing, a better self-protection of the membrane through its reflective properties against heat and radiation, consequently ensuring a longer life expectancy of the waterproofing system.
 ARCO ALUTOP ELASTOBituminous prefabricated membrane, protected with a foil of embossed aluminum, with a special form of the embossment which permits the free dilation of the metal. The use of the aluminum foil as upper side finish assures, besides perfect watertight sealing, a better self-protection of the membrane through its reflective properties against heat and radiation, consequently ensuring a longer life expectancy of the waterproofing system.
 ARCO RFCBituminous prefabricated multilayer membrane, composed of distilled bitumen and APP polymers, with a special composition that allows the easy melting of the bottom layer. Uses: renewal of old roofs, covered with mineral slated membranes.
 ARCO BIARMATOBituminous prefabricated membrane, having a double reinforcement composed by a polyester fabric and a glass fibre mat, ensuring better dimensional stability. The glass fibre reinforcement is situated close to the upper side, thus increasing its resistance to external loads.
 ARCO VAPOUR BARRIERSpecial prefabricated modified polymer-bitumen membrane, desigend to ensure total impermeability against vapor migration. The reinforcement of the membrane is made of a glass fibre mat coupled with an aluminium foil.
 ARCOTHERM DX2ARCOTHERM DX2 is a special membrane that provides a “3 in 1” functionality.
 ARMEX BRIDGE
   - PLASTO (sand/slate/TNT)Prefabricated modified polymer-bitumen membranes, composed of distilled bitumen and APP or SBS polymers, reinforced with a special SPUNBOND polyester fabric, having great tensile strength and resistance to static loading. Area of use: road or rail bridges, highways, structures with heavy traffic.
   - ELASTO (sand/slate/TNT)Prefabricated modified polymer-bitumen membranes, composed of distilled bitumen and APP or SBS polymers, reinforced with a special SPUNBOND polyester fabric, having great tensile strength and resistance to static loading. Area of use: road or rail bridges, highways, structures with heavy traffic.
   - THERMO AD (sand/slate/TNT)Prefabricated modified polymer-bitumen membranes, composed of distilled bitumen, APP polymers and thermo adhesive polymers, reinforced with a special SPUNBOND polyester fabric, having great tensile strength and resistance to static loading. Area of use: road or rail bridges, highways, structures under heavy traffic. Adhesion to the substrate happens by heat transfer from the hot asphalt, and does not require using a torch.
 ARMEX DURAGRID GEO-TSpecial prefabricated polymer-bitumen membrane, having distinct layers composed of distilled bitumen and APP, SBS and thermo adhesive polymers. The reinforcement is especially designed to distribute and reduce the tension of the applied load, to reinforce the road bed, and to increase the life expectancy of the structure. Adhesion to the substrate happens by heat transfer from the hot asphalt (European Patent Ep 1932660).
 ARMEX ROOF
   - PLASTOPrefabricated modified polymer-bitumen membrane, composed of distilled bitumen and APP or SBS polymers, having a special reinforcement made of glass fiber fabric. The reinforcement grants high mechanical performance and extreme tearing resistance. Areas of use: base layer for multilayer applications in roof waterproofing, torch applied or mechanically fastened, especially recommendable over wood or metal decks with mineral wool insulation — by nail fixing.
   - ELASTOPrefabricated modified polymer-bitumen membrane, composed of distilled bitumen and APP or SBS polymers, having a special reinforcement made of glass fiber fabric. The reinforcement grants high mechanical performance and extreme tearing resistance. Areas of use: base layer for multilayer applications in roof waterproofing, torch applied or mechanically fastened, especially recommendable over wood or metal decks with mineral wool insulation — by nail fixing.
   
   
  Certifications
ELASTECH 5000 PLUS (SBS) -25oC  
ELASTECH 5000 PLUS are prefabricated modified polymer-bitumen made of distilled bitumen with elastomeric polymers (SBS), forming a compound whose characteristics are determined by the polymer matrix.

The performance of the bitumen is therefore increased along with the durability and the resistance to high and low temperatures, while the optimum adhesive and impermeable qualities of bitumen remains unchanged.

ELASTECH 5000 PLUS & mineral ELASTECH 5000 PLUS (P & PA) membranes are reinforced with a Spunbond Woven non Woven polyester fabric stabilized with longitudinal reinforcing threads, which provide the membrane with good mechanical characteristics and excellent dimensional stability in hot conditions, thus reducing the problems of the retraction
of the head lap joints.

ELASTECH 5000 PLUS (P) is available with sand or TNT (polypropylene mat) finish on the upper face to prevent the roll from sticking to itself and benefits the unrolling of the product during installation.

Mineral ELASTECH 5000 PLUS (PA) is supplied with mineral slate chips which are available in natural or colored version.
This mineral finish acts as a weathering surface and enhances the aesthetics after application.

A 10 cm side selvedge and a 15 cm end lap selvedge is provided to allow easy alignment of the membrane during application.

The lower face of both ELASTECH 5000 PLUS & mineral ELASTECH 5000 PLUS is backed by a special polyethylene burn-off film which melts during torching and prevents the roll from sticking to itself.

The correct application temperature is visible from the lightly embossed surface of the membrane which is below the burn off film, when the correct application temperature is reached, this embossment melts also helping vapor diffusion and avoiding blistering.
download datasheet
PDF
basic application details

    SIKA ROMANIA SRL                                                         
    Sf. Gheorghe
    Tel. : +40 - 267 - 314229  Fax : +40 - 267 - 351896
    E-mail : office@arcon.com.ro

  All rights reserved SC SIKA ROMANIA SRL ©2020
 

Design by FREESIGN